Anti-abuse & flood protection

Abuse is stopped at whichever layer can stop it most cheaply. Being honest about which layer owns which threat matters, because the daemon cannot defend against some attacks no matter how it's written.

The three layers

┌─ upstream / provider ─┐  volumetric floods (large SYN / UDP), amplification
│  (scrubbing, e.g. VAC) │  → only the network above you can absorb these
├─ host kernel / firewall┤  SYN cookies, per-IP connection-rate, conntrack caps
│                        │  → cheap kernel drops before the daemon is involved
├─ echoIRCd (application)┤  connection & message floods, clones, spam content
└────────────────────────┘  → everything that survives to a real IRC session

What the daemon can't do: a SYN flood is spoofed TCP handshake packets that exhaust the kernel's backlog before accept() ever returns — kernel territory (enable net.ipv4.tcp_syncookies). A UDP flood is pure bandwidth exhaustion, and since IRC is TCP-only the packets never reach the application at all. Both are volumetric and are handled by the kernel and the upstream provider, not by Rust. Everything below is what the application can do: stop abusive sessions and content.

Application layer (echoIRCd)

At the accept edge

Rejected before any per-connection state is allocated — the cheapest point:

accept_rate / accept_burst — a per-source-IP token bucket. A source opening connections faster than the rate has its socket dropped immediately. Off by default; trusted proxies and server links are exempt. Complements the concurrent clone caps below with a rate cap.
connflood = <max> <secs> and connectban — refuse, and optionally z-line, an IP that opens too many connections too fast.

Per connection

Clone caps — connection classes cap concurrent connections per IP with localmax (this server) and globalmax (network-wide).
registration_timeout — a connection that never sends NICK+USER is dropped.
tls_handshake_timeout — a TLS connection that opens the port but never negotiates is reaped (it holds no session, so nothing else would).
conn_waitpong — hold registration until the client answers a server PING with the exact cookie. Real clients auto-reply; dumb bots never do.
recvq / hardsendq / softsendq — per-connection queue caps bound memory; a client past softsendq has its reads paused (backpressure), and past hardsendq is dropped.

Per message (flood control)

Fakelag — flood_messages per flood_seconds (opers exempt) throttles a client sending too fast; per class, fakelag=no disconnects instead of throttling. Channel modes +f / +j / +F add per-channel message / join / nick-change flood limits.

Reputation & network bans

Reputation — every address accrues a score over time; the y:<score> extban bans by it (+b y:<100).
DNSBL — check connecting IPs against DNS blocklists (mark / kill / kline / gline / zline). Each dnsbl zone may carry its own name / action / duration / reason (the reason supports %ip%), or fall back to the global defaults.
X-lines — persistent K / G / Z / Q / CBAN / RLINE bans (see operators).

Spam content

Modules that inspect what users do:

Module / setting	Catches
`antirandom`	Random-looking (drone) nick/ident/realname.
`antimixedutf8`	Words mixing look-alike Unicode scripts.
`filter` / `badword` (`+G`)	Configured spam phrases / words.
`solvemsg`	Un-vouched users must answer an arithmetic question before PMs deliver.
`recaptcha` / `cloudflare_challenge`	Human-verification gate at registration.
`autodrop`	Pre-registration clients that blurt HTTP verbs (scanners).
`blockamsg`	Mass `/amsg` / `/ame` spam.
`restrictmsg` / `restrictcommands` / `restrictchans` / `denychans` / `channames`	Constrain who may PM, run commands, or create/name channels.
`dccallow`	Unwanted DCC transfers.
Security groups	Named user sets (`g:<name>` extban) for policy by trust level.

Kernel / firewall layer

The repo ships deploy/firewalld-echoircd.sh, a per-source-IP connection-rate limit installed through firewalld's direct-rule interface (so firewalld owns it and won't flush it on reload):

sudo deploy/firewalld-echoircd.sh add     # 30/s burst 60 per IP on the IRC ports
sudo deploy/firewalld-echoircd.sh del     # remove
sudo deploy/firewalld-echoircd.sh show

It's safe by design: a policy-ACCEPT rule that only drops the rate-limited excess to the client ports, loopback-exempt, changing no other policy. This drops connection-churn floods in the kernel before they cost the daemon anything — the same job as accept_rate, one layer lower. On a host without firewalld, the equivalent is an iptables/nftables hashlimit rule, or an upstream WAF.

A recommended baseline

Kernel: net.ipv4.tcp_syncookies = 1 (usually already on).
Firewall: the firewalld script above (or an equivalent per-IP rate limit).
Daemon: set accept_rate / accept_burst; keep registration_timeout and tls_handshake_timeout at sane values; enable conn_waitpong if bots are a problem; add DNSBL zones; use connection classes with localmax / globalmax to cap clones.
Upstream: rely on your provider's DDoS scrubbing for volumetric attacks — nothing on the host can absorb a saturating flood.

Keep the firewall rate and accept_rate roughly aligned so the two layers agree, and pick values generous enough that a real shared-NAT never trips them (a single client never opens dozens of connections per second).

5.8 KiB Raw Blame History